29
TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSES
WHAT TO DO
Dryer is taking too
long/results were
not satisfactory.
Drying cycle selected not
appropriate for the load.
Select an appropriate cycle for the
load. Refer to pages 15 and 18.
Dryness level selected not
appropriate for the load.
Select a higher dryness level. Refer
to page 19.
Selected drying temp, not
appropriate for the load.
Select a higher drying temp. Refer
to page 20.
Dryer overloaded for the
cycle.
Some cycles have a lower max load
size. Refer to page 18.
Try dividing the load in half and dry
half at a time.
Lint filter is blocked.
Clean the lint filter.
Condenser filter is blocked.
Clean the condenser filter. Refer to
page 25.
Water tank is full.
Empty the water tank. Refer to
page 24.
Environmental conditions
may be affecting dryer
operation.
In hot, humid conditions the dryer
will take longer to dry a load and be
less efficient.
Load overly wet at the start
of cycle.
Remove more water from the load
before placing it in the dryer, eg
select a faster spin speed on your
washer, if appropriate for your load.
Dryer not draining water out
properly.
Check the drain hose (if connected)
for blockages or damage. You may
need to call for service refer to
page 36.
Items got tangled.
Try separating items and drying
similar items together. Open items
out when you place them in the
dryer. Do not fold them. Untangle
items, eg pull long sleeves out so
they are not stuck/trapped on the
inside of the garment.
Dryer is not
draining.
Drain hose not connected to
the water tank.
Ensure the drain hose is connected
correctly. Refer to page 8.
Water tank not in place
correctly.
Ensure water tank is properly in
place.
Drain hose or drain blocked
or damaged.
Check drain hose (if connected) and
drain for blockages or damage.
