Fisher & Paykel DH8060P Installation Instructions & User Manual Download Page 33

Page: 33 / 40

TROUBLESHOOTING

PROBLEM

POSSIBLE CAUSES

WHAT TO DO

Noises.

Dryer is overloaded.

Remove some items from the dryer.

Dryer has a fault.

Continuous beeping or a musical
series of beeps with a message
displayed on digital display. Refer to
pages 26 and 27.

Beeps signalling the end of
a drying cycle.

End of cycle beeps can be turned
off refer to page 20.

Dryer has not been levelled
properly.

Refer to page 7.

Dryer makes unfamiliar
noises.

At the start of the cycle the dryer
may make some unfamiliar noises
when the compressor turns on.

Vibration.

Dryer is not installed on a
stable surface.

Ensure the dryer is installed on a
flat, stable surface. Refer page 6.

Dryer is not level.

Ensure the dryer is correctly
levelled. Refer page 7.

Dryer is overloaded.

Remove some items from the dryer.

Creasing.

Cycle selection not
appropriate for the load.

Select the ‘Easy Iron’ cycle to
minimise creasing.

Dryer is overloaded.

Remove some items from the dryer.

‘Dry Temp’ and/or ‘Dryness
Level’ selected too hot/too
long for load type.

Try selecting a lower ‘Dry Temp’ and
‘Dryness Level’.

‘Wrinkle Free’ option not
selected.

Select the ‘Wrinkle Free’ option to
rotate the load at the end of the
drying cycle. Refer to page 20.

Summary of Contents for DH8060P









































Search results

Summary of Contents for DH8060P

Reviews:

Related manuals for DH8060P

Brands by name

Popular brands

Fisher & Paykel DH8060P, Installation Instructions & User Manual

Search results

Summary of Contents for DH8060P

Reviews:

Related manuals for DH8060P

Brands by name

Popular brands