478182
25
4.10 Lid Lock
AquaSmart
™
uses the same lid lock that is used
on previous machines, and is locked during the
complete cycle.
The Lid Lock symbol (padlock) appears in the
top right hand corner of the screen on LCD
models, and in the centre left next to the power
button on the control panel on LED models,
letting you know at a glance if you can open
the lid or not.
To unlock the lid at any time, press
START/PAUSE
.
If the lid is left open on the AquaSmart™,
the
machine will be unable to lock the lid, and the
cycle will be halted. The machine will beep and
on the LCD model display a message to alert
the user, with the padlock symbol flashing on
the LED model. If this occurs, ensure that the lid
is closed, and press the
START/PAUSE
button.
If the lid-lock fails in the closed position, the locked lid can be forced upwards and out of the lock.
Note: This is the only time in which we would recommend doing this.
If the harness is damaged, the complete lid lock assembly will need to be replaced.
If the power supply is cut during the spin cycle, the machine will keep the lid locked until the rotor
has ceased to turn (3 to 10 seconds). Only then will it release the lid from the lock. The motor is
acting like a generator and allows the lock to stay energised under the bowls inertia.
In a brown out situation (where power is lost only momentary), the machine will restart at the start
of whichever section of the cycle it was on and continue the wash.
The lid is locked throughout the complete cycle.
Eco-Active
Locked
Agitate
Locked
Spray Rinse
Locked
Deep Rinse
Locked
Spin
Locked
