24
!4
HANG WATER DISPENSING DOOR PANEL
2
Angle top display tabs into the
door panel. Ensure the harness
is free of pinching. Firmly push
against bottom display tabs
and insert into the door panel
until you feel it clip securely.
Ensure the display is flush with
the door panel.
3
Remove water tube from holder
on the refrigerator door.
4
Hang door panel onto M8 studs.
Ensure the panel is free to pivot
for water connections (refer to
A
).
5
Connect display harness
onto the refrigerator door
by inserting firmly until
you feel it clip securely
(refer to
B
).
On the external display,
enable the dispenser lock,
this will help prevent any water
from dispensing during water
connection. To lock, press the button
for 4 seconds. The LED above the button
will illuminate.
A
B
6
Firmly push the water tube
into the spigot behind the
door panel until the marked
line is not visible.
Ensure the water tube is routed away from any
sharp objects, sharp corners, and not in a location
where it can be kinked or squashed when the door
panel is secured, (as this will stop water flow).
Flush water filtration system. See page 26.
To secure door panel, follow the instructions in
the next section: ‘Hang non-water dispensing door
panels’.
For Fisher & Paykel EZKleen stainless steel door panels only.
1
Remove the external display
module from inside the
refrigerator.
Thread the display harness
through the door panel cavity.
Ensure the grommet is engaged.