8
4
PRODUCT AND CAVITY DIMENSIONS – WITH RD9121W DOOR PANEL SET
RS9120WRU
RS9120W(R/L)J
DOOR OPENING AND CLEARANCE DIMENSIONS
mm
A
Depth of door (widest opening) measured from front of door
940
B
Depth of drawer (open) measured from front of drawer, including handle
400
C
Depth of drawer (open) measured from front of drawer, excluding handle
360
D
Minimum door clearance to adjacent wall*
(115° – full internal access)
410
E
Minimum door clearance to adjacent wall*
(90° – reduced internal access)
110
*
Measured from front cabinetry edge.
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
DOOR OPENING & CLEARANCE DIMENSIONS
d
A
b c
b c
a
e
Wall
115° DOOR OPENING
(FULL ROTATION)
90° DOOR OPENING
115° DOOR OPENING
[FULL ROTATION]
DOOR OPENING & CLEARANCE DIMENSIONS
d
A
b c
b c
a
e
Wall
90° DOOR OPENING
Z
For 90° door swing a hinge limiting pin is supplied with
your appliance. This pin fits in the boreholes of the top
hinge (refer to
Z
).
WARNING!
●
●
Before opening the doors, ensure that the refrigerator is
on its base packer and the polystyrene stability blocks
are still in place.
●
●
Drawer must be closed when fitting the hinge limiting pin.
●
●
Follow these instructions to avoid risks that can cause
serious injury or death.
1
Open door to 90°.
2
Align the hinge limiting pin vertically with the bore hole.
3
Use a hammer to drive the pin through the bore hole.
