16
8
2134mm HEIGHT CAVITY – ATTACH TOP TRIM
WARNING!
Take care when working with the refrigerator outside of the finished enclosure, as
the refrigerator is not secured and has the possibility of tipping forward. Tipping of
refrigerator can lead to serious injury or death.
2
On the right side of the top trim, insert M5 nuts x2 onto the top and bottom slide.
Slide nuts towards the centre of the trim, 330mm.
Repeat this process on the opposite side.
4
At the top of the refrigerator, place the assembled top trim behind the existing refrigerator
trim. Bring the top trim forward and insert screw heads through the key holes of the joining
brackets (refer to
A
).
330mm
330mm
330mm
330mm
1
Ensure all external packaging material is removed from the refrigerator before installation.
5
Slide the screws located on the refrigerator sideways towards the narrow side of the key
holes on the joining bracket, and tighten screws to lock top trim in position (refer to
B
).
3
Position joining brackets over the M5 nuts. Thread screws x2 (M5 x 8 pan head Phillips
screws) through bracket hole and secure.
Repeat this process on the opposite side.
A
B
