Fischer Panda 15000i PMS, Manual

Page: 116 / 176

Inverter Panda PMGi
Seite/Page 116 - Kaptitel/Chapter 10: Inverter Panda PMGi 4.5.16
10.5 Alternative front side/connection side PMGi 120 V/240 V -
representative picture
Fig. 10.5-1: Connection side
To connect the PMGi use the prepared cable and connect to
socket 4(PMGi in)
Connect your termination box with the socket 1. Do not cover
the air out grille (3)
1. Socket for Load (PMGi out)
2. PE/N bridge
3.Air out grille
4. Socket for generator connection (PMGi in)
5. FP- Bus socket connection to generator
6. Cooling water in (cold side) (Water cooled version only)
7. Cooling water out (hot side) (Water cooled version only)
10.5.1 Socket pins of the PMGi
Attention! Connecting one Phase with the earth pin will destroy the
PMGi
10.5.1.1 PMGi AC out
Fig. 10.5-1: PMGi AC out
Single phase - PMGi AC out
Connect your AC terminal box here
representative picture
5
1
2
4
3
6 7