Assembly instructions Rev 7.1
3
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
1
Introduction
This document covers :
-
The application of Fischer FiberOptic Series electrical contacts and optical termini to electrical and fiber optic
cables (singlemode and multimode fibers)
-
The assembly of fiber optic cable with a cladding size of 125 µm and having the cable structure described in
Fischer FiberOptic Series Cable Specifications
-
The assembly of Fischer FiberOptic Series electrical contacts and optical termini and Rear Accessory sets
(Wire, Cable Clamp and Potting sets) to Fischer FiberOptic Series Hybrid (referred as FOH in the present
document)
Please read these instructions thoroughly before starting assembly.
2
Document history
Date
Revision #
Author
Controller
Modification description
15.03.2017
6.0
JGY
SRH/CMI
New Document
06.04.2017
7.0
JGY
SRH/CMI
Adding instruction for electrical contact assembly §6
06.07.2018
7.1
SKE
JGY
Correct references of component list in §4
3
Definitions and Acronyms
Text
Definition / Acronym
FO
Fischer FiberOptic
FO H
Fischer FiberOptic Series Hybrid
IEC
International Electrotechnical Commission
