Assembly instructions Rev 7.1
15
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Step 2 :
Polish the termini with 5µm
Silicon carbide polishing film,
until no peripheral chips are
visible.
Do not remove more than 100
µm.
Polishing film:
5µm Silicon
carbide
Polishing Pad : 90
duro black
Lubricant: DI-water
Fixture tool: FO-
10019
Wipe abundantly the polishing
tool holding the termini with
demineralized water and clean it
carefully with a lint-free cloth.
Use an airpressure gun to remove
residual water.
Clean the polishing pad with
demineralized water and lint-free
cloth, from the center outwards.
Spray some demineralized water
on the polishing pad and place
the polishing film, starting at
edges of the polishing pad.
Spray abundantly demineralized
water on the polishing film.
Step 3 :
Polish the termini with 1µm
Diamond polishing film in an 8
pattern motion (or pattern of the
polishing machine).
Polishing film:
1µm Diamond
Polishing Pad: 80
duro green
Lubricant: DI-water
Fixture tool: FO-
10019
