Assembly instructions Rev 7.1
20
This document is the property of Fischer Connectors.
This document must not be reproduced or distributed, in whole or in part, without prior written permission of Fischer Connectors.
Clean the polishing pad with
demineralized water and lint-free
cloth, from the center outwards.
Spray some demineralized water
on the polishing pad and place
the polishing film, starting at
edges of the polishing pad.
Spray abundantly demineralized
water on the polishing film.
Step 4 :
Polish the termini with
AngstromLap Final Polish SiO2 in
an 8 pattern motion.
Do not clean the polishing tool
after this step, to avoid creating
scratches on the polished
ferrule.
Polishing film:
AngstromLap Final
Polish
Polishing Pad:80
duro green
Lubricant: DI-water
Fixture tool:
TX00.285
Geometrical control :
Ferrule Radius[mm]:
Min 5 - Max 12
Apex Offset[um]:
Min 0.0 – Max 50.0
If fail, repeat from step 3.
Fiber core inspection :
Examine the endface of the
ferrule for scratches according to
left pictures.
If fail, repeat from step 4.
N
O
