fisair DFLEX 1100, Assembly Instructions Manual

Page: 22 / 53

DFLEX Assembly instructions |
22
- Insert the aforementioned tubes on module -3- about 80mm from the basic unit
(module -4- ) and immediately below section S5-4.
- Place the steam battery (module -5- ) on the tubes slightly separated from the
basic unit, so as not to damage the previously applied sealant.
- Move the steam battery (module -5-) towards the basic unit by matching the
screw holes for the junction flanges of section S5-4.
- Find the correct screws in the bag marked S5-4 and secure them to attach the
flanges of module -4- to module -5-. The next step is to place the fibre glass
insulation around the junction between these two modules.