18
OSR-CWDM Users Guide Revision A 1/2019
10.2 Saving files
Section 10
File Management
Saving Channel Analyzer Files
To save a scan, open file management, ensure the OSA tab is highlighted and touch save. The file naming
screen with the onboard keyboard will be displayed. The name of the last file saved during a session will be
the default name and anytime the unit is powered on the default name reverts to “default” Use the onboard
QWERTY keyboard to name the file and touch save.
Saving Scope Files
From within the file management screen, ensure the scope tab is highlighted and touch save. When the onboard
QWERTY is displayed, enter the file name and touch save.
Saving Configurations
At any time the current parameters may be save as a testing configuration. To create a set of parameters, use
the settings screen and set the testing parameters to the desired values. Open the file management screen,
highlight the Config tab and touch save. Name the configuration as required and touch save.
10.3 File Operations
Marking Files For Batch Operations
Multiple files may be uploaded (copied) to a computer, or deleted at a time. To mark the files for these
operations, highlight a file to be included in the operation and touch the mark (select on some units) icon. The
highlighted filename will now be displayed in red and the next file will be in the highlighted position. Continue
marking (selecting) files by touching the mark (select) icon. To skip files simply move down the file list until the
next file to be marked is highlighted and touch mark (select) again. The mark (select) is a toggle and to unmark a
file, place it in the highlighted position and touch mark (select) again and it will be unmarked. Once the files are
marked (selected) touch the icon for the delete or upload functions.
Note: If files have been marked for batch processing, only the marked files are process not the highlighted file as
in single file processing. (The last file in a list may be marked when in the highlighted position)
