7
OSR-CWDM Users Guide Revision A 1/2019
Before shipment, this instrument was inspected and found to be in perfect working order and free of defects.
The shipping carton contains the following:
1.
Channel Analyzer, with protective boot and Li-ion battery installed
2.
Universal AC/DC charger with interchangeable mains
3.
USB cable
4.
CD with CertSoft software and user’s manual
5.
Set of interchangeable adapters, SC and FC
Section 5
Preparation For Use
5.1 Inspection
Fig 5.1
The instrument’s Model/Part Number, Serial Number and Date of Manufacture are indicated on a label located on
the back of the unit. The instrument’s history is filed at the factory by model/part number and serial number. The
unit's serial number is also located on the top plate just above the USB Port.
5.2 Identification and Configuration
The OSR-CWDM is equipped with a 100-240V-0.4A input and 15V, 1.28A, center positive output universal AC/DC
battery charger. This charger is supplied with interchangeable mains for US, Great Britain, Europe and Australia.
The unit is shipped with factory installed Li-ion batter installed. Depending on usage, fully charged battery pack
will typically enable approximately 12 hrs. of use. Fully discharged batteries require approx. 2 hours to charge.
Batteries ar not field replaceable and therefore the unit is to be returned to the factory for battery replaement.
Warning
To Prevent Fire
or Shock Hazard:
Do not install battery types other than those specified by the manufacturer
¾
Do not expose the battery charger to rain or excessive moisture
¾
Do not use the AC adapter when there are signs of damage to the enclosure or cord
¾
Ensure that you are using the correct charger for the local line voltage
¾
Do not use any other charger than the one provided with this instrument.
¾
Failure to follow these caution statements may void the warranty of this equipment.
5.4 Power Requirements
