12
OSR-CWDM Users Guide Revision A 1/2019
Note
The directional buttons and the select button are not operational in the settings screen.
The View, Measure and Brightness settings are toggles and when touched, will switch between options. The
Pass Range setting requires the user to enter a range for the dB Scale.
Section 8
Setting Test Parameters
Fig 8.1
Return to
Scan Mode
or File Manager
View -
Select between total
power and power tilt
modes
Brightness -
Chose either high or low
brightness
Measure -
Select between
measurments
displayed in wave
-
length (nm) or
Frequency (Tz)
Pass Range -
Allows the user
to enter values to
display channels as
passing or failing
Note
The value in black is the current value, touching anywhere in the parameter box will change values.
8.1 Parameters Setting Screen
