25.3.2003
Rev. 2.4
Service
15
Wash programs:
TSTOP
Wash program temperature control: choise with separate short-circuit piece. Wash
program with temperature control: When the temperature control has been chosen
the wash pump runs until the set value of the rinse temperature is reached. After
this the program continues normally to the rinse.
Wash
Wash pump is activated according to the selected wash program or if the TSOP
is selected until the rinse temperature has reached the set value. Detergent dos-
ing pump control is activated when the wash pump is running.
Stand-by func-
tion
There is a “dropping time” of 3 seconds between the wash and rinse cycles.
Rinse
The rinse cycle takes 17 seconds. The drain pump runs during the rinse cycle
if the machine is equipped with it.
End of program
The wash program signal light goes off to indicate the end of the wash program
cycle.
Summary of Contents for Metos MM-5
