Page 39
Web service
- currently not function
Mobile service
- to enable mobile browsing
Port
- this is the web port which should always be at 80
Quality
- selects the quality of the streaming video
Channel
- select channel you would like to apply settings to
Device ID
- shows your DVR ID number
FPS
- frames per second. The higher the fps, the better
Register
- No function
Set time
- set date and time
Channel
–select channel of the PTZ
Ch name
– give the channel number a name
Main
– quality of camera -
CIF or D1 on 4/8 channel
Standard/Net Mode on 16 channel
Minor-
low quality of camera-
Select QCIF, CIF or None.
PAL/NTSC
–default is NTSC
Audio
-
turns audio on or off (only works if a mic is installed)
Position
- Changes the position of the date and time and ch. No.
Select Left down, Left up, or None.
Main size
-
chose the size of the file for streaming.
Size is by MB/H(megabytes per hour)
Minor size
- chose the lowest number of MB/H
Minor FPS
- Choose the frames per seconded – higher the better
PTZ
Address:
Address of the PTZ camera
Protocol:
Choose the protocol of the PTZ
NOTe:
ONLY compatible with pelco-D
Band Rate chose the band rate of the PTZ
Record task - sets your scheduling recording
REMOTE CONFIGURATION
CAMERA SETTINGS
