Page 22
ADVANCED OPERATION
ALARM
Alarm
Alarm In:
Software Setting: Main menu <Setting> <Device> <Alarm In>
Use the Alarm In feature to configure alarm settings. To access the Alarm
In feature, right click the mouse to access the quick access menu under
setting. Select Device and select Alarm In. NOTE: External alarm devices
must be connected to the alarm block on the rear panel of the DVR in order
to use the I/O (input/ output) alarms of the system. See page 23 “Alarm
Inputs” and “Alarm Inputs Diagram” for details on attaching alarm inputs.
Alarm Input ID:
Select which switch on terminal block to be used for alarm (1-4).
Work Mode:
Set alarm to normally open device or normally closed device.
Copy To:
Copy settings to specific alarm inputs.
Clear Alarm:
When alarm is activated, press Clear Alarm to turn alarm off.
Default:
Set “alarm imput” back to default settings.
Set Alarm:
See page 19
Alarm Input Menu
