FirmTek, LLC
www.firmtek.com
Copyright
Copyright
©
1999-2014 FirmTek, LLC. All rights reserved.
No part of this manual may be
reproduced, translated by any means, photocopied, or transmitted in any form without the prior
written permission of FirmTek.
Trademarks
FirmTek, UltraTek, AV-Tek, SeriTek names and logotypes are trademarks of FirmTek, LLC.
Apple, Macintosh, Mac OS, OS X, and the Mac logo are registered trademarks of Apple
Computer, Incorporated. The "Built for OS X" graphic is a registered trademark of Apple
Computer, Incorporated, and used under license. All other manufacturer product names
mentioned in this manual are for identification purposes only and are trademarks or registered
trademarks of their respective owners.
Changes
FirmTek reserves the right to make any changes to product design, specifications, or details
without notice. Actual product photos or screenshots may look different from those provided.
Notice
The material content of this manual is for informational purposes only. It is possible the content
of this manual may contain technical inaccuracies, typographical, or other errors. FirmTek
assumes no liability for any errors, omissions, or from the use of this manual that may result from
such errors, including, but not limited to loss of data or profits.
Before installing the SeriTek/6G2+2 or any other hardware or software, you are responsible for
backing up data contained on any storage devices. After hardware or software installation, you
are responsible for backing up data on any storage devices at frequent intervals. FirmTek, LLC is
not liable for any loss of data or damage to equipment resulting from the use of the
SeriTek/6G2+2 host adapter.
External Shielded Serial ATA Cable
The SeriTek/6G2+2 host adapter uses specially shielded external Serial ATA cables to ensure
integrity during data transfers. Please use caution and handle the cables carefully. Hold the
connector at the ends (not the cable itself) when inserting and removing the cable from the
SeriTek/6G2+2 and the external enclosure. To maintain peak performance keep the number of
cable insertions and removals to a minimum.
