12
2.
A list of available communication baud rates will appear. Use the TAB and arrow keys or mouse
to make the proper selection Press Select to continue.
3.
Assuming the selected COM port is available the following screen appears.
USING THE YZ300P SOFTWARE
Initially, the YZ300P displays the default messages of the YZ300 (YZ320) Interlock Annunciator.
The Command Center allows the user to Read, Write and Erase all stored messages, Open and Save
the message file and select the communication address. Pressing the Quit bar will terminate the pro-
gram.
•
Read
- the YZ300P will read all messages currently stored in the YZ300 (YZ320) and display
the custom message in the appropriate location. If no message is stored, the default message will
be displayed. (Library selected messages will not be displayed on the YZ300P).
•
Write
- the YZ300P will upload or write all messages to the YZ300 (YZ320). If the message
displayed on the YZ300P screen is a default message then no writing of that message location
will take place.
•
Erase
- the YZ300P will send an erase message command to each message location in the
YZ300 (YZ320) and restore that message location to the factory default condition, no message
stored.
•
Save
- the YZ300P allows the current message file to be stored for later recall and re-program-
ming of other YZ300 (YZ320) Interlock Annunciators. Clicking Save will open a dialog box
allowing the user to store the current message file using any descriptive name. The user must
select or create the appropriate folder location to store the file. Typically, the YZ300P wants
During the Read, Write and Erase operations, the progress bar located on the YZ300P
screen will move left to right indicating the status of the selected operation.
