Firetide HotPort 5020-LNK, Installation Manual

Page: 10 / 46

Before you permanently install
4
• Quick start sheet
• Warranty card
Parts of a HotPort 5020-LNK node
The next picture shows the HotPort 5020-LNK node. The LEDs are visible at the
top of the node when it is oriented correctly for installation on a pole.
Radio 1 LED Power LED
1
Radio 1
2
3
Radio 2 is not available
on this model.
The next picture shows the connectors and LEDs on the bottom panel of a
HotPort 5020-LNK node. Weatherproof caps protect the connectors on the
bottom panel. Rubber caps are on the antenna connectors.
Rubber cap
Port DC power
Reset button
(behind the valve)
Ground screw
Ground screw
HotPort 5020-LNK nodes must be connected to earth ground. The ground screw
is on the bottom panel between the Ethernet port and the DC power connector.