Firestar vi30, Quick Start Manuals

Page: 11 / 14

11 vi30/40 Dual Cooled QSG Version 2.1
Firestar™ vi30/40 Dual Cooled Laser Quick Start Guide
13.1
DB- 9 Connector.
13.3 Optional Quick Start
Plug for the Laser.
13.2
DB- 9 Interface.
Control Connections:
13.
If using the UC-2000 controller, see the UC-2000 QSG located on our website, then connect the
laser’s control DB-9/BNC interface to the laser. (See the following figures.)
Warning!
Serious Personal
Injury
The Quick Start Plug bypasses the laser’s safety interlock function,
potentially exposing personnel to hazardous invisible laser radiation.
If using a UC-2000 Universal Laser Controller, refer to the UC-2000 Laser Controller Quick Start
Guide and it’s Operator’s Manua l for setup and operation instructions located on our website.
Continue below and to the next section.
Note:
Note:
IF not using a SYNRAD controller for your laser, AND your OEM vi30/40 laser is put into service
for the first time, OR it has been re-located and has not been sed yet in its new location,
functionality should be verified. Go to the next section .
Optional
Quick
Start Plug for the Laser.