FireRock ARCHED FRONT, Installation, Specification And Operation Manual

Page: 9 / 36

9
HINTS
1. If this is your first FireRock installation, it would only take a few extra minutes to “dry stack” (erect without mortar) your
firebox to gain a better understanding of how the components go together. Then disassemble and erect using FireRock
Adhesive Mortar.
2. Use a level to ensure all components are level by course and plumb as you erect your fireplace and chimney.
3. Ensure your base plate is level and at a proper elevation so the finished hearth height (including firebrick lining) is correct
in relationship to your finished floor height.
4. Realize that this is at minimum a two-man job. Some of these components are too heavy for one person to lift.
5. Always install in accordance with local codes.
INSTALLATION CONSIDERATIONS
(CONTINUED)