firegear Outdoors KWBTO Outdoor Gas Fireplace
15
INSTALLATION
2
PLATEAU / KEY WEST SERIES
919-227
01/09/13
7.
Remove LP tank and LP hose from valve.
9
. Secure regulator in position with top bracket - secure with 2 screws.
NOTE:
Top bracket to sit over top of lower bracket.
Attach supplied "MAX. 0.5 PSI" sticker to top bracket.
6.
Remove panel (90
º
to the right of the ON/OFF switch). Lift panel up slightly
by handle and pull outwards. Place panel on a soft clean surface.
Remove this
panel
LP hose
Switch
Handle
Regulator
Flexline
Regulator
Bracket
Top
Bracket
8
. Install regulator bracket onto unit base with 2 screws. Connect fl ex line to
regulator—position regulator onto bracket.
Diagram 6
Diagram 7
Location to install
regulator
Access for
Hard line
Diagram 8
Diagram 9
Diagram 10
10.
Remove connector from end of fl ex line.
Remove
connector
Diagram 11
