firegear Outdoors KWBTO Outdoor Gas Fireplace
17
INSTALLATION
7$%/(723,167$//$7,21
1.
Place table top on unit.
2.
Secure each corner with the bolt/nutsert.
3
. Reverse steps to remove.
6HFXUHHDFKFRUQHUZLWKDEROW
Before you start:
Stainless must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time.
Claims for damage after installation will not receive consideration.
To protect the finish during installation and handling
- cotton gloves
MUST
be worn at all times while handling the panels (even when removing
protective coating).
Stainless will discolor a little during normal operation. This is normal and should not be considered a defect.
All hand and finger marks
MUST
be cleaned off with a soft cloth and a stainless steel cleaner. Most stainless steel cleaners leave a film/residue on
the surface of the panels. Use an ammonia based cleaner (ie. glass cleaner) to remove this film before applying heat to the unit.
Failure to do this
may result in burn stains which you will be unable to remove.
This is not a warranty item.
