13
EN
will sound all connected alarms, however will not enable
the unit to switch its contacts.
It is advised that alarms are tested in accordance with
the respective instruction manuals.
Frequent testing of the relays is advised to ensure its
continued and safe operation.
Guidelines and best practices for testing are as follows:
1. After the system is installed.
2. After prolonged absence from the dwelling (e.g. after
holiday period).
3. After repair or servicing of any of the system’s
elements or household electrical works.
ALARM
In the event of an alarm (from a local network or from
an external source) the local network will sound a full
alarm and the red LED on the WRLYB-1 will activate
continuously.
Smoke, heat and CO alarms, properly installed and
maintained, are an essential part of a good home
safety programme.
TROUBLESHOOTING
The Power LED is
not illuminated on the
Unit.
Check the power source.
The green unit power LED
should be illuminated.
The green LED
flashes every 60
seconds.
There is no external
power to the unit. It is
powered by the batteries.
The red LED flashes
and a buzzer sounds
every 60 seconds.
The batteries are low and
need replacing.
The red LED is
continuously showing.
The network is in alarm.
Respond immediately.
