6
EN
INSTALLATION
The FireAngel WRLYB-1 unit should be securely
mounted to a flat surface using the 4 fixing locations
provided. The unit should be located in an area
where it will not be subjected to any excesses in
temperature or humidity.
The WRLYB-1 is designed to be permanently mounted.
The unit can be screwed directly to the wall or ceiling.
LED
AC Mains 230V
DC Power in 12V
(WRLYM-1 Only)
Trigger input 12-24V
External input
TST
Test Button
LRN
Learn Button
(WRLYM-1 Only)
DIP Switches
Relay B
Relay A
Screw holes
4 x 1.5V AAA Batteries
LED
DC Power in 12V
Trigger input 12-24V
External input
TST
Test Button
LRN
Learn Button
DIP Switches
Relay B
Relay A
Screw holes
AC Mains 230V
YT2
Trunking
YT2
Trunking
WARNING - Ensure to isolate the power
prior to operation of the dip switches.
PLEASE NOTE - Relay contacts will only
operate when on mains power.
WARNING - Ensure to isolate the power
prior to operation of the dip switches.
