Fire-Lite IPDACT, Installation Manual

Page: 48 / 51

IPDACT Module - Configuration
IV-45
Doc. Dm373-I
Rev. 2.0
General Info
Teldat MIP
S/N: 8209/01101 FF190504 0
v4.1 Apr 06 2006
01/02/1980 09:16:20
LAN
MAC: 0-A0-26-30-3-E9 state: up
INPUT, OUTPUT
Input:OFF Output:INACT
Reset/Phone console jumper
state:OPEN
Press any key to continue...
Option
e)
displays the state of the connection with the VisorALARM IP
receiver.
State: Active (4)
Press any key to continue...
Option
f)
displays the enabled events. To return to the menu, strike any key.
Option
g)
displays the IP parameters that are running in the device. If the
device has not obtained an address through DHCP, this displays the IP
address, mask and gateway configured in the “
a) Generic MIP config
”
menu. If on the other hand, IP configuration has been dynamically obtained
from a DHCP server, these parameters will be displayed together with other
parameters pertaining to the DHCP protocol: remaining time for the obtained
address value, remaining time until the next attempt to renew the said address
and the DHCP server the parameters were taken from.
My IP Address: 61.156.44.3
Netmask: 255.255.252.0
Gateway: 61.156.44.1
DHCP information.
Remaining lease = 107559 (sec)
Renew lease in 53559 (sec)
DHCP server: 61.156.44.1
Press any key to continue...