Fire-Lite IPDACT, Installation Manual

Page: 12 / 51

IPDACT Module - Description
II-9
Doc. Dm373-I
Rev. 2.0
Figure 6. IPDACT circuit details.
The device CPU, memory and the LAN (identifiable through the RJ-45
connector) are found in the control module. This manages all the information
procedure and the sending of the information through an IP network over the
LAN.
The telephonic module physically supports the control and contains all the
connection points with the control panel. This manages the entire telephonic
interface with the control panel and the client telephone network (public
telephone network termination point and client phone wiring).
From a configuration / monitoring point of view, the IPDACT possesses LEDs
that permit you to view the status of the various elements, from the P2 jumper
to control various aspects and a telephonic console. This telephonic console
is accessible from the connection to the control panel (TO-AP) and requires
an analog telephone with tone dialing.
The IPDACT has an asynchronous console which permits you to monitor /
configure the device through an asynchronous terminal.