IPDACT Module - Description
II-13
Doc.
Dm373-I
Rev.
2.0
Tamper Chock Blocks
•
TAMPER: An additional input connecting to a box tamper which indicates
if the box is open. The input is normally closed.
Choc block power connections
+12/24V: It is possible to power the unit at either 12 or 24 volts. For UL
Listed Installations, the power source is regulated, limited in power and
UL compliant.
•
GND: power ground terminal.
II - 5.
LAN
The device connects to the LAN through an RJ45 (CN1) connector.
Figure 9. LAN Connector and cable.
Failure detection in the Ethernet interface is indicated by the analog output
activating.
II - 6.
Console
An asynchronous console is available for configuration / monitoring tasks.
The IPDACT has a black RJ45 connected labeled CNI for console connection.
Consequently you will need a DB9 to RJ45 converter for the said connection
which is provided by Fire-Lite. The following figures show both the converter
and the connector respectively.
Summary of Contents for IPDACT
Page 1: ...IP Communicator IPDACT Installation Manual Document DM373 I Version 2 0 March 2007...
Page 19: ......
Page 29: ......
