Document #50066 Rev. D2 12/03/02 P/N 50066:D2
15
Optional Devices
1.5.4 Batteries
The cabinet provides space for 7 Amp Hour batteries (for 12 Amp Hour to 18 Amp Hour batteries use the UL listed
BB-17F battery box). Batteries must be ordered separately.
1.6
Optional Devices
1.6.1 ADM-24
The ADM-24 Annunciator Driver Module supports the RZA-5F Remote Annunciator module. Annunciator wiring is
supervised for open circuits by this module. The Annunciator Driver Module mounts to connector J3 in the upper
right corner of the main board. Refer to Figure 1-2 on page 12 and Figure 2-10 on page 28.
1.6.2 RZA-5F
The RZA-5F Remote Annunciator mounts on a standard single-gang box and provides LED indications of the
following:
✓
Alarm Zone 1 (red LED)
✓
Alarm Zone 2 (red LED)
✓
Alarm Zone 3 (red LED)
✓
Alarm Zone 4 (red LED)
✓
Alarm Zone 5 (red LED)
✓
System Trouble (yellow LED)
A Local Trouble Sounder and Tone Silence Switch are also provided. All LEDs and their wiring are supervised for
open conditions. Any open condition will cause the System Trouble LED to illuminate. Slide in paper labels permit
an easy change of zone information (refer to Figure 2-11 on page 28).
Note that the RZA-5F Remote Annunciator
requires the use of the ADM-24 Annunciator Driver Module. Only one ADM-24/RZA-5F combination is allowed per
system.
1.6.3 CAC-5F
The CAC-5F Class A Converter module converts the Style B (Class B) Initiating Device Circuits to Style D (Class
A). The CAC-5F mounts to terminal block TB2 located in the upper right corner of the main circuit board (refer to
Figure 1-2 on page 12 and Figure 2-15 on page 30). The removable terminal block on the CAC-5F module provides
for ease of wiring.
1.6.4 NACA-2F
The NACA-2F Notification Appliance Circuit Class A Converter module converts the two NAC circuits from Style
Y (Class B) to Style Z (Class A). The converter module mounts to terminal block TB5 located in the upper left cor-
ner of the main circuit board (refer to Figure 1-2 on page 12 and Figure 2-14 on page 30). The removable terminal
block on the NACA-2F module provides for ease of wiring.
1.6.5 DP-5024
The DP-5024 Dress Panel is red and is available as an option (required for Canadian installations). The dress panel
restricts access to the system wiring while allowing access to the membrane switch panel (refer to Figure 1-1 on page
12).
Summary of Contents for MS-5024
