STARTING AND USE INSTRUCTIONS
PINKY 26
31
4.7.12 CYLINDER BRUSHES BELT REGULATION AND REPLACEMENT (cylinder
brushes group version)
Please follow the instructions below:
Remove the ignition key from the dashboard in order to avoid the accidental start of the
machine;
unscrew the four screws and remove the plastic case (see detail 1 in picture 4.16);
tighten the belt by means of the nut (see detail 2 in picture 4.16) in order to increase the
draw of the spring that regulates the belt (see detail 3 in picture 4.16);
unloose the nut in order to remove and replace the belt;
tighten the nut until the belt is well tightened;
set the case again up by means of the four screws.
1 2 3
PICTURE N° 4.16
