SAFETY
PINKY 26
14
3.6 SAFETY DEVICES
The machine is equipped with the following safety devices.
Socket
(picture 3.1), the same socket used for the battery charger. In case of emergency,
this socket must be taken away from the plug by means of its handle.
The operator must be trained about safety rules. Do never restore this safety system before
the problem has been sorted out. If it is necessary ask for the technician help.
Safety Device:
PINKY 26 is equipped with a special device which avoid the risk of
squashing whilst the machine is reversing (see detail 1 in picture 3.2). Thanks to a safety
lever, the machine is blocked when the lever
gets in contact with the operator’s stomach.
Moreover, the machine starts running reverse for a couple of meters in order to avoid the
operator’s squashing during a wrong manoeuvre.
3.7
SAFETY DIAGNOSTIC SIGNALING
The electronic card is equipped with a particular system which shows the machine errors through quick
flashings on the battery charger display placed on the dashboard.
The number of switched on LEDs represents one of the errors listed below:
1 FLASH
Running microswitches fault. One flash shows that one of the running
microswitches is already on
2 FLASHES
The battery is down or under tension
3 FLASHES
Off duty code
4 FLASHES
Engine circiut open
5 FLASHES
Fault inside the regulator or the engine
6 FLASHES
Potentiometer fault. This disgnostic signaling is off duty for the 2-cable
potentiometer
7 FLASHES
MOSFET (Metal Oxide Semiconductor Field Effect Transistor) high
temperature. This alarm is activated when the temperature reaches 75°C
±
5°C
and it has to decrease the engine max. current.
8 FLASHES
The engine is already rotating, i.e. the operator switches the regulator on while
the machine is descending a slope
9 FLASHES
Software fault
PICTURE 3.1
2
1
