SAFETY
PINKY 26
13
ING. O. FIORENTINI S.p.A. Technical Dept. is always at your disposal to design components or
parts for a particular use of machine as requested by the customer.
3.4. OPERATORS’ QUALIFICATION
The below sche
me shows the requested operator’s
qualifications for each operation/maintenance
to do on the machine:
OPERATION
OPERATORS’ QUALIF
ICATION
Driving/control of the machine
Trained operator
Installation/ disinstallation
Fiorentini technician
Mechanical parts maintenance
Fiorentini technician
Electric parts maintenance
Fiorentini technician
Cleaning maintenance
Trained operator
Dismantling and demolition
Fiorentini technician
ING.O. FIORENTINI S.r.l. suggests to train the operator before using the machine. The operator
also must be trained about safety rules and carefully read this manual.
ING. O. FIORENTINI S.r.l. is not responsible for any possible damage to people
and/or things caused by the non-observance of the instructions dealt within this
manual.
3.5 PROTECTION AND WARNING DEVICES
It is absolutely forbidden to tamper or disconnect safety and warning
devices while the machine is working;
It is important to check periodically safety and warning devices.
Brushes Protections
PINKY 26 is equipped with two rotating brushes made of nylon. The
machine cannot reach dangerous areas thanks to one fixed steel
protection and one fixed plastic or PEHD protection set up on each
brush. These cases can be only willingly removed.
Suction Engine
Protection
PINKY 26 is equipped with a cover set up on the recovery tank which
allows suction engine inspection and protection whilst the machine is
functioning. Therefore, it is very important that the cover is well set up
on the machine.
Parking Brake
PINKY 26 is equipped with a braking device which allows to stop the
machine safely and avoid the risk to start the machine again unwillingly.
