STARTING AND USE INSTRUCTIONS
PINKY 26
20
4.5. INSTALLATION
Installation must be carried out by authorized personnel after reading this
manual..
4.5.1
BATTERIES INSTALLATION
Please follow the instructions below to install the batteries:
the batter
ies room is under the operator’s seat protected by a cover;
lift the cover of the batteries room up (picture no. 4.4 detail 2);
install the batteries in their room (picture 4.4 detail 2 and make sure the batteries boxes are
not broken;
do never add distilled water after batteries recharge;
clean the surfaces for the cables connections;
use the handles on the batteries to move them.
4.5.2 BATTERY CHARGER INSTALLATION
Batteries must be recharged in a place equipped with a proper suction system of gases spread
during this operation. Otherwise, batteries must be charged in a ventilated and dry place far from
heat sources and corrosive substances.
Protect the electric network with a delayed switch or with a fuse whose capacity is higher than the
battery charger maximum input.
Control the battery outlet polarity.
PICTURE N° 4.3
Connect the battery charger to the machine
socket
PICTURE N° 4.4
