Fimap FA15+ 115V, Original Instruction, Page: 27 / 372

25
EN
The control panel components are identified as follows:
1. Vacuum nozzle.
2. Button for releasing the vacuum nozzle catch.
3. Collection tank lid release knob.
4. Slit for securing the extension hose.
5. Lifting handle.
6. Housing for winding the power cable.
7. Pin for fixing the lid of the collection tank.
8. Slot for fixing the lid of the collection tank.
9. Vacuum controller indicator light.
10. Main switch.
COMPONENT POSITIONING
11. Accessories support.
12. Socket for electric brush.
13. Filter - disposable collection bag (optional).
14. Collection tank.
15. Collection tank lid.
16. Intake air cartridge filter.
17. Power cable.
18. Exhaust air filter.
19. Exhaust air filter compartment lid.
20. Power cable fastener.
21. Exhaust air filter compartment lid catch.
The stages for making the appliance safe, thereby making it possible
to carry out operations safely, are as follows:
1. Make sure that the main switch (1) is in the rest position, if not,
disable it.
2. Check that the plug (2) on the power cable (3) has been taken
out of the socket (4) of the mains supply, and if not, disconnect it.
3. Wind the power cable under the appliance’s lifting handle.
APPLIANCE SAFETY
ATTENTION: You are advised to always wear protective
gloves, to avoid the risk of serious injury to your hands .
ATTENTION:
To prevent damaging the power cable, disconnect the
plug from the mains socket by directly pulling the plug and not the
cable.
3 4
19
2 6
9
10
1
5 11
15
12
17
16
18
20
21
1
OFF
4
2
3
7-8
14 13
1
1
5
2
2
3 4