EN
Fillikid GesmbH | Tiefentalweg 1, A-5303 Thalgau, Austria | fillikid.at
MADE IN CHINA
Adjust the Isofix connector
Fitting and releasing the Isofix connectors
Fitting and releasing the top tether
Step 1:
Attach the top tether connector,which is located in the middle of the headrest to the corres-
ponding hook.(refer to the manual of car manufacturer for detail information regarding the location of
top tether connecting hook)
Keep holding the Isofix release button and Isofix adjustment
button in the same time by one hand, so you can adjust the
Isofix connector.
It is same on the other side of the car seat.
Fitting of ISOFIX connectors:
Step 1: Pull out the ISOFIX connectors on both sides to the
maximum extension position as descripted above.
Step 2: Connect the car seat with the Isofix fixture in the car,
when you hear a clear Click and the lock indicator windows
are green, the Isofix connectors are locked safely. Check if
the car seat is really tighten in the isofix connectors by
pulling on it.
Step 3: Tighten the top tether until the indicator window turns
green, and make sure if it tight enough.
Releasing of ISOFIX connectors:
Step 1: Keep pulling out the ISOFIX adjustment handle by one hand, meanwhile move out the
child seat in order that you have enough space to press the ISOFIX release button.
Step 2: Press the Isofix release button.
