manualshive.com logo in svg

Fiery Fiery EX12 Color server, Job Management Manual

Share
Download
Fiery Fiery EX12 Color server Job Management Manual Download Page 93

5

5-3

Main window

You can open a PostScript or PDF (Portable Document Format) file, but it must show 
a spooled/held job status.

N

OTE

:

If you have installed DocBuilder Pro as an optional kit, you must install a 

dongle on your workstation. If the dongle is not attached, you will see an error 
message. For more information, contact your authorized service/support technician.

When you choose the Impose command, a page-imaging process is invoked that 
generates a PDF version of the job on which DocBuilder Pro will perform imposition.

A status window appears while the job is imaged for the main window. 

When it opens, the main window displays the job. No layout will be applied unless the 
job has been previously imposed. Templates for common layouts are provided and can 
be invoked from the main window as described in 

“Using templates”

 on page 5-9.

Summary of Contents for Fiery EX12 Color server











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands