QuickServer Start-up Guide
Page 14 of 30
The configuration of the QuickServer is provided to the QuickServer’s operating system via a comma-delimited file
called
.
If a custom configuration was ordered, the QuickServer will be programmed with the relevant device registers in
the Config.csv file for the first time start-up. If not, the product is shipped with a sample config.csv that shows an
example of the drivers ordered.
In the main menu of the PS-GUI screen, go to Setup, File Transfer, Retrieve.
Click on config.csv, and open or save the file
Refer to the FieldServer Configuration Manual in conjunction with the Driver supplements for information on
configuring the QuickServer. See
www.prosoft-technology.com/Support/
for specific details.
details.
6 . 2 C h a n g e t h e C o n f i g u r a t i o n F i l e t o M e e t t h e A p p l i c a t i o n
“CONFIG.CSV”
6 . 1 R e t r i e v e t h e S a m p l e C o n f i g u r a t i o n File
6
C O N F I G U R I N G T H E Q U I C K S E R V E R
ProSoft Technology, Inc. is a provider of FieldServer QuickServers. For Technical Support call
+1 661.716.5100
