manualshive.com logo in svg

FieldServer FS-8700-41, Driver Manual

The FieldServer FS-8700-41 is a cutting-edge device designed for seamless integration of various industrial protocols. Enhance your experience with our user-friendly Driver Manual, available for free download at manualshive.com. Accessible in a few clicks, this comprehensive manual ensures successful implementation and optimization of the FS-8700-41.

Share
Download
background image

FS-8700-41 Simplex 4100 Driver Manual 

 

 

 

 

 

 

Page 37 of 48 

FieldServer Technologies

 1991 Tarob Court Milpitas, California 95035 USA   

Web

: www.fieldserver.com 

Tel

: (408) 262 2299   

Fax

: (408) 262 2269   

Toll Free

: (888) 509 1970   

email

: [email protected] 

Error Message 

Description 

Sim4100:#34. Bad Seq. Sequence number reset. 

Message sequence number incorrect.  Check Simplex User Manuals, and 
driver manuals. Contact FieldServer Technologies for additional support. 

Sim4100:#36.  FYI.  Bad  sim4100_func=%d  in 
MapDesc=<%s> 

Check the CSV file for the correct Simplex function type. 

Sim4100:#38.  FYI.  Bad  sim4100_func=%d  in 
MapDesc=<%s> 

Check the CSV file for the correct Simplex function type. 

Sim4100:#39  FYI.  Data  abandoned!  State  not 
recognized. Mapdesc=<%s> 

Attribute  was  found,  but  State  not  found  in  driver  table.    Contact 
FieldServer Technologies for additional support. 

Sim4100:#40  FYI.  Data  abandoned!  Array  too 
short.(%d) Mapdesc=<%s> 

Check the CSV file Data Array lengths 

Sim4100:#41  FYI.  Data  abandoned!  Array  too 
short.(%d) Mapdesc=<%s> 

Check the CSV file Data Array lengths 

Sim4100:#43.  Err.  Can  only  monitor  %d  point(s) 
for ClearAll 

Contact FieldServer Technologies for additional support. 

Sim4100:#44  FYI.  ClearAll  mapDesc's  must  be 
passive 

Map Descriptor function has been changed automatically 

Sim4100:#45 

FYI. 

User 

added 

SHOW 

attribute=<%s> offset=%d method=%d 

 

Sim4100:#46 Err. No space. Driver rejects SHOW 
attribute=<%s> offset=%d method=%d 

No  space  is  available  in  internal  driver  table.    Contact  FieldServer 
Technologies for additional support. 

Sim4100:#47 Err. Duplicate. Driver rejects SHOW 
attribute=<%s> offset=%d method=%d 

Duplicate found in internal driver table.  Contact FieldServer Technologies 
for additional support. 

Sim4100:#48  FYI.  User  added  SHOW  attr 
state=<%s> value=%d 

 

Sim4100:#49 Err. No space. Driver rejects SHOW 
attr state=<%s> value=%d 

No  space  is  available  in  internal  driver  table.    Contact  FieldServer 
Technologies for additional support. 

Sim4100:#50 Err. Duplicate. Driver rejects SHOW 
attr state=<%s> value=%d 

Duplicate found in internal driver table.  Contact FieldServer Technologies 
for additional support. 

sim4100:#51 Err. Length must be specified and > 
0. 

Check the CSV file for the length fields. 

SIM4100:#52  FYI.  Incoming  Abandoned.  Node 
offline 

Check  the  CSV  file  for  node  definitions,  Simplex  hardware,  and 
connections.    A  device  node  appears  to  be  offline.    Contact  FieldServer 
Technologies for additional support. 

Sim4100:#53.  Md=<%s> Abandoned. Polling was 
inhibited. 

Obsolete.  Contact FieldServer Technologies for support. 

Sim4100:#54. Err. SeqNumber check disabled. 

Sequence number checking was disabled.  Check your password.  Contact 
FieldServer Technologies for support. 

Sim4100:#55.  Error.  Bad  Sim4100_Func=%d  in 
MD=<%s> 

Check the CSV file for the correct Simplex function type. 

Sim4100:#56 

Not used. 

Sim4100:#57*  Err.  Cant  parse  Login  message. 
Ignored. 

The driver ignored Login messages. No corrective action is required. This 
message is printed for your information only. 

Sim4100:#58  FYI.  You  could  have  used  an  Array 
called <%s> to expose diagnostic info. 

This  message  is  printed  for  your  information  only.  It  can  safely  be 
ignored.  For  additional  information  read  section  “Appendix  C.3.2  Driver 
Exposed Stats” 

Sim4100:#59 Err. Checkpoint. Report this to Tech 
Support. 

An  internal  driver  diagnostic  has  been  triggered.  You  must  report  this 
error to FieldServer’s Technical Support. 

Sim4100:#60 Err. MapDesc=%s. No Node. 

Every Sim4100 Map Descriptor must be connected to a node. Ensure that 
the parameter ‘Node_Name’ has been specified on the Map Descriptor. 

Summary of Contents for FS-8700-41

















































Reviews:

No comments

Related manuals for FS-8700-41

TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
AMX RMS Administrator'S Manual preview
RMS
Brand: AMX Pages: 212
F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual preview
CLIENT SECURITY 9.00 - QUICK
Brand: F-SECURE Pages: 32
CA BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9... Manual preview
BABWBN2900E20 - BRIGHTSTOR ARC BACKUP V9...
Brand: CA Pages: 69
Netscape Certificate Management System 6.2 Administrator'S Manual preview
Certificate Management System 6.2
Brand: Netscape Pages: 874
Fortinet FortiClient Datasheet preview
FortiClient
Brand: Fortinet Pages: 4
Sonifex Mentor Time-Server User Handbook preview
Mentor Time-Server
Brand: Sonifex Pages: 4
UNIBLUE DRIVERSCANNER 2009 Manual preview
DRIVERSCANNER 2009
Brand: UNIBLUE Pages: 62
Nikon 9235 - Coolscan III Reference Manual preview
9235 - Coolscan III
Brand: Nikon Pages: 153
Zio Interactive Cassiopeia Pocket PC User Manual preview
Cassiopeia Pocket PC
Brand: Zio Interactive Pages: 17
MACROMEDIA BREEZE-FOR MEETING PRESENTERS Manual preview
BREEZE-FOR MEETING PRESENTERS
Brand: MACROMEDIA Pages: 96
Cabletron Systems SEHI-22/24 User Manual preview
SEHI-22/24
Brand: Cabletron Systems Pages: 90
MACROMEDIA BREEZE-USING THE MACROMEDIA BREEZE MANAGER Use Manual preview
BREEZE-USING THE MACROMEDIA BREEZE MANAGER
Brand: MACROMEDIA Pages: 146
TANDBERG ANALYTICS EXTENSION - Administrator'S Manual preview
ANALYTICS EXTENSION -
Brand: TANDBERG Pages: 36
Wavelink Communicator wlcug1020090331 User Manual preview
Communicator wlcug1020090331
Brand: Wavelink Pages: 67
Canon CAPTUREPERFECT 3.1 Operation Manual preview
CAPTUREPERFECT 3.1
Brand: Canon Pages: 85
Ulead COOL 3D 3.5 Manual preview
COOL 3D 3.5
Brand: Ulead Pages: 8
Ulead HD Plug-in 2.0 Manual preview
HD Plug-in 2.0
Brand: Ulead Pages: 11

Brands by name

Popular brands

Load more brands