FS-8700-41 Simplex 4100 Driver Manual
Page 19 of 48
FieldServer Technologies
1991 Tarob Court Milpitas, California 95035 USA
Web
: www.fieldserver.com
Tel
: (408) 262 2299
Fax
: (408) 262 2269
Toll Free
: (888) 509 1970
Appendix A.2.2.
Attribute States recogni sed for Attribute M ethod 1
The table below reports the attribute states recognized for attribute method=1.
Attribute State
Value
AUTOMATIC CONTROL
1
OUTPUT NORMAL
2
SELF TEST NORMAL
3
CORRECT DEVICE
4
PRIORITY 15
5
RANGE NORMAL
6
ALARM
7
SHORT
8
SHORT
9
ARMED
10
ENABLED
11
ON-LINE
12
ENABLED
13
NORMAL
14
TROUBLE
15
OFF
16
ON
17
0
Examples:
PHYSICAL STATE SHORT
The Driver recognizes ‘Physical State’ as attribute 2 and uses method 1 to evaluate the rest of the line. The attribute state
SHORT has a value of 8. The number 8 is stored at location 2 in the Data Array.
VALUE=77 / 0% OF ALARM / 1.0% SMOKE
The Driver recognizes ‘VALUE=’ as attribute 17 and uses method 2 to evaluate the rest of the line. The Dri ver stores the
values; 77, 0 and 1.0 in three consecutive locations starting at location 17. Note that there is a gap between attribute 17 and
the next attribute in the table sufficient for storing up to 3 values. The three values are seperated by slashes .
AVERAGE VALUE=75 / ALARM LEVEL=145
The Driver recognizes ‘AVERAGE VALUE’ as attribute 14 and uses method 3 to evaluate the rest of the line. The Driver stores
the values; 75 and 145 in two consecutive locations starting at location 14. An equal sign ‘=’ precedes each numeric value.
