Fidelix FX-RP multiDISPLAY
Programming manual
page 36 of 38
Reg# Function
R/W Notes
3035 Set VCOML
R/W 0-21, 0=VLCD63x0.60, 1=VLCD63x0.63, etc.
3036 Set VCOMH
R/W 0-63, 0=VLCD63x0.36, 1=VLCD63x0.37, etc.
3037 Set VLCD63
R/W 0-15, 0=VREFx1.780, 1=VREFx1.850, etc.
3038 Set Frequency
R/W 0-6, 0=50Hz, 1=55Hz, etc...
3039 Apply Display Settings
R/W If 1, apply values from registers 3035 – 3038.
These registers contain values to change internal
voltage levels, affecting the viewing angle and
other viewing related settings. Typically the
standard settings are tested and optimal. Change
them on your own responsibility.
3040 Enable Click Sound
R/W 0=disabled, 1=enabled, 2=user selectable
3041 Enable Finger Mode
R/W 0=disabled, 1=enabled, 2=user selectable
3042 Enable Upside Down Mode
R/W 0=disabled, 1=enabled, 2=user selectable
3043 Settings Page Access through long press R/W 0=enabled, 1=disabled, 2=partially enabled
(Modbus address disabled)
3044 Open Page
R/W Open corresponding page if value found from link
list (cleared automatically). See “
” section.
3045 Language
R/W Set language of time schedule page
0=English, 1=Finnish
3046 Open Page 2
R/W Open corresponding page if value found from link
list (not cleared automatically). See “
section.
3047 Calibration Page
R/W 0=normal, 1=disabled (also the settings page will
be disabled), 2=skip calibration and jump directly
to settings
3048 Calibration delay
R/W 0=normal (7 sec), all other values = seconds
3049 Startup sound
R/W 0=normal (“Positive action” in Quiet mode
1 or higher=startup sound disabled
3050 En-/Disable Daylight Saving Hour Change R/W 0=enabled (default), 1=disabled (no automatic
change from or to daylight saving time.)
When disabled, visible (though not editable) on
the settings page.
3051 Not in use
R/W Reserved
3052 Disable temperature measurement
compensation
R/W 0=normal (= use compensation), 1=disable
compensation (only use this when an external
temperature sensor is used; the compensation
accounts for the heating of the PCB and the heat
generated by the display depending on its
brightness)
3053 Internal Temperature Measurement
Adjustment
R/W This value in °C is added to the internal
temperature measurement value. (e.g. -23
means -2.3 °C)
3054 New Day Value
R/W New Day Value (1-31)
3055 New Month Value
R/W New Month Value (1-12)
3056 New Year Value
R/W New Year Value
3057 New Hour Value
R/W New Hour Value (0-23)
3058 New Minute Value
R/W New Minute Value (0-59)
3059 Apply Values from Registers 3054-3058
R/W Changing from 0 to 1 will apply new date and
time from registers 3054 - 3058
3060 Play Quiet Sound
R/W Play a quiet sound (1-12=play tune, 13=stop
playing. Tunes listed at register 3061 on the next
page)