14.3 Output and Settings for Alibi Memory & Management Report
Complete both 2 procedures below to output management report.
1.
Define report output comport and report content in F33. Refer to
F33
of
Internal Function Table
on
paragraph
6
for details. Avoid assigning RS485 for report output unless Machine ID (set in F18)
is = blank.
2.
Define search for search criteria and date range in F34. Refer to
F34
of
Internal Function Table
on
paragraph
6
for details. Multiple search criteria are acceptable based on condition “AND”. For example,
Operator Code number XXXX and Produce Code YYYY. All transactions which fulfil
both
these 2 criteria
will be outputted.
14.4 Totalization
Except date range “All” is selected, instrument will automatically output the totalized data of below result at the
end of the output.
•
Total number of transactions of the date range
•
Total Net Weight
•
Total Gross Weight
•
Total Piece Count
15. Barcode Scanner
To increase working efficiency, this instrument supports serial and Bluetooth barcode scanner which utilizes
Bluetooth 2.0 for communication. Refer to paragraph
8.1
for setting details.
15.1 Using Barcode Scanner to Simulate Operation Key Input
To simulate
[ZERO]
, [
TARE]
and
[PRINT/M+]
key input, simply scan the corresponding barcodes below.
15.2 Inputting Customer & Product Code and Operator Number.
To change scanner input target, scan either one of the below barcodes, then scan a customer, product or
operator number barcode.
