22
2.
Set Machine ID number (00 ~ 98) then press
[Print/M+]
. To clear machine ID number,
press
[CE/x10]
then press
[Print/M+]
to save.
3.
Set group number (00 ~ 99) then press
[Print/M+]
. To clear group number, press
[CE/x10]
then press
[Print/M+]
to save and return to F18.
F19
Manual Entry for
Customer / Product
Code & Description
P Code
Product Code & Description
C Code
Customer Code & Description
Customer & Product code accept both numeric numbers and alphabets. Maximum
length = 18 digits.
To allow letters and symbols entry via keyboard, set F30 to Yes.
Enter code starting from H, then M and finally L. Press
[Print/M+]
to confirm and end
editing after last digit has been input.
Instrument displays first 6 digit of description content.
Enter description starting from H, then M1, M2, M3 and finally L. Press
[Print/M+]
to
confirm and end editing after last digit has been input.
Instrument displays
Save = ?
. At this step: -
➢
Press one of the numeric keys (0 ~ 9) to save the code and description entered to
that PLU location number, or
➢
Press
[Print/M+]
to confirm without saving to PLU.
Notes: -
a.
If a Product/Customer Code is = blank, Product/Customer Description will be ignored.
b.
Customer and Product code does not support print format 1 (Lab 1).
c.
Customer and product code entered will be carried out automatically on output formats
Lab 2 ~ Lab 5.
d.
Customer and product description entered will be carried out automatically on output
Lab 2.
F20
Keyboard Lock
** Off
(Disable)
On (Enable)
When keyboard lock is =
On
, only
[Zero]
,
[Tare]
&
[On/Off]
key will be accessible during
operation status.
F22
Lab 2 Output Print
Format
** STD
CUSTOM
F26
Near Zero Value
** 20d or 20d
1
Near Zero value is useful for dynamic weight check applications to bypass unnecessary Lo alarm
during uploading and unloading process.
Notes
: -
•
Value entered valid only when Check function is activated.
•
Near zero weight value can be any value between 20d and Lo limit.
•
Any near zero value which less than 20d will be ignored. Instrument will deem 20d as
minimum near zero weight value.
•
The Hi Lo comparison remains non-activated when weight reading is less than the near
zero value entered here.
F28
Ask for Operator
Number when
Power On
Yes
** No
•
Yes: - Instrument will ask for operator number when power on. Enter 4-digit operator
number or press
[CE/x10]
to skip operator number when asked.
