system snmp trapcomm
Scope
System
Syntax
config system snmp trapcomm <
community-name
>
Description
Set the system’s SNMP Trap community string. The Trap
community name can contain up to 15 characters.
Default setting
The default Set community is
trap
.
Options
None
Example
MetroStar>config system snmp trapcomm frodo
system snmp trapdest
Scope
System
Syntax
config system snmp trapdest <
dest-#
> <
dest-address
>
Description
Set one of the system’s SNMP trap destination IP
addresses. There are up to 4 different trap destinations
available. Setting one of these to
0.0.0.0
disables that
destination. There is no significance to the order of
addresses. When a trap is triggered it will be duplicated
and sent to all set destinations (different than
0.0.0.0
).
Default setting
The default trap destination is
192.168.1.21
and all other 3
are
0.0.0.0
Options
None
Example
MetroStar>config system snmp trapdest 3 192.168.1.30
system snmp trapfilter
Scope
System
Syntax
view|show system snmp trapfilter
Description
View the system’s trap filtering parameters
Default setting
N/A
Options
None
Example
MetroStar>show system snmp trapfilter
38
