manualshive.com logo in svg

FibroLAN MetroStar MMM-01, User Reference Manual

Share
Download
FibroLAN MetroStar MMM-01 User Reference Manual Download Page 27

 

offline copy2module 

Scope

System 

Syntax

config offline copy2module <

s

> <

c

> <

loc|rem

> 

Description

Copies the offline configuration of the selected slot and 
channel numbers to the physically installed device. 

Note that the copy operation does not actually apply the 
configuration to the device. It will be applied after a reboot. 

Default setting

N/A 

Options

The 

all

 keyword may be used to apply the command to 

all offline configured devices 

Example

MetroStar>config offline copy2module 1 1 loc 

MetroStar>config offline copy2module all 

 

 

offline reload 

Scope

System 

Syntax

config offline reload 

Description

Reloads the saved offline configuration (non-volatile 
memory) to the volatile memory.  This may be useful in 
cases where changes were made to the offline 
configuration without saving and the user wishes to revert 
back to saved configuration. This command applies to the 
entire offline chassis and requires confirmation. 

Default setting

N/A 

Options

None 

Example

MetroStar>config offline reload 

 

 

 

 

 

 

 

19 

Summary of Contents for MetroStar MMM-01






















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands