12
operatIon
7:
Operation
7.1:
Controls
1
2
3
1. First/ button,
2. Second/ button,
3. LED ring.
7.2:
Operating modes
Scene Controller
This mode is enabled by default or by setting parameter 20 to 0.
In this mode, the device can activate scenes in the Z-Wave controller
by sending scene ID and attribute of a specific action (using Central
Scene Command Class). Associations do not work in this mode.
Button
Action
Scene ID
Attribute
1st
b
ut
to
n
Clicked once
1
Key Pressed 1 time
Clicked twice
1
Key Pressed 2 times
Clicked thrice
1
Key Pressed 3 times
Held
1
Key Held Down
Released
1
Key Released
2nd
b
ut
to
n
Clicked once
2
Key Pressed 1 time
Clicked twice
2
Key Pressed 2 times
Clicked thrice
2
Key Pressed 3 times
Held
2
Key Held Down
Released
2
Key Released
Double Button
This mode is enabled by setting parameter 20 to 1.
In this mode the device works as two separate buttons and it uses
associations to control other Z-Wave devices (groups 2-5). You can
control multiple devices of different type in this mode. Every button
can control different group of devices.
