11
removIng from Z-Wave netWork
6:
Removing from Z-Wave network
Removing (Exclusion)
– Z-Wave device learning mode, allowing to
remove the device from existing Z-Wave network. Removing also re-
sults in resetting the device to factory defaults.
To
remove
the device from the Z-Wave network:
1. Set the main controller into remove mode (see the controller’s
manual).
2. Quickly, three times click, then press and hold one of the buttons
for 12 seconds.
3. Release the button when the device glows green.
4. Quickly click the button to confirm.
5. LED will start blinking yellow, wait for the removing process to
end.
6. Successful removing will be confirmed by the Z-Wave controller’s
message and red LED colour.
