Fiat Strada Owner'S Handbook Manual Download Page 134

Page: 134 / 195

132

If a general protection
fuse (MEGA-FUSE,

MIDI-FUSE) is activated,
contact a Fiat Dealership.

WARNING

Before replacing a fuse,
make sure that the

ignition key has been removed
and that all the other services
are switched off and/or
deactivated.

WARNING

If a general protection
fuse for safety systems

(airbag system, braking
system), power unit systems
(engine system, transmission
system) or steering system
blows, contact a Fiat
Dealership.

WARNING

Refer to the tables on the following
pages to identify the protective fuse.

Never replace a blown
fuse with metal wires or
other material.

If the replaced fuse
blows again, contact a

Fiat Dealership.

WARNING

Never replace a fuse
with another with a

higher amp rating; DANGER
OF FIRE.

WARNING

Summary of Contents for Strada




































































































































































































Search results

Summary of Contents for Strada

Reviews:

Related manuals for Strada

Brands by name

Popular brands

Fiat Strada, Owner'S Handbook Manual

Search results

Summary of Contents for Strada

Reviews:

Related manuals for Strada

Brands by name

Popular brands