Fiat Strada Owner'S Handbook Manual Download Page 131

Page: 131 / 195

129

fig. 135

F0X0115m

fig. 136

F0X0116m

fig. 137

F0X0117m

– disconnect the connector then

undo the screws A-fig. 136 to
access the bulbs to be replaced;

– remove the bulbs, pushing them

slightly and turning them
anticlockwise;

The bulbs fig. 136 are:

B - 12V-P21/5W for the brake lights

C - 12V-P21W for the reversing

lights

D - 12V-P21W for the direction

indicators

E - 12V-P21/5W for the side lights

and rear fog lights.

BRAKE LIGHT

The third brake light is LED type.

In the event of a failure, contact a
Fiat Dealership.

NUMBER PLATE LIGHT
fig. 137

To replace the bulb:

1) undo the fixing screws A and

remove the lens.

2) remove the bulb holder, rotating

it slightly, and replace press-fitted
bulb B.

Summary of Contents for Strada




































































































































































































Search results

Summary of Contents for Strada

Reviews:

Related manuals for Strada

Brands by name

Popular brands

Fiat Strada, Owner'S Handbook Manual

Search results

Summary of Contents for Strada

Reviews:

Related manuals for Strada

Brands by name

Popular brands