Fiat Strada Owner'S Handbook Manual Download Page 140

Page: 140 / 195

138

IF THE VEHICLE
MUST BE RAISED

WITH THE JACK

See paragraph “If a tyre is
punctured”, in this section.

The jack is only to be
used for replacing

wheels on the vehicle with
which it is provided. Never use
the jack for other purposes, such
as lifting other vehicles. Never
use the jack to carry out
repairs under the vehicle.

WARNING

Incorrect positioning of
the jack may cause the

raised vehicle to fall. Do not
use the jack for loads greater
than that indicated on the jack
itself.

WARNING

Bear in mind that:

– the jack requires no adjustment;

– the jack cannot be repaired; in the
event of a fault it must be replaced
by another original one;

– no tool other than the cranking
device illustrated in this section may
be fitted on the jack.

Summary of Contents for Strada




































































































































































































Search results

Summary of Contents for Strada

Reviews:

Fiat Strada, Owner'S Handbook Manual, Page: 140 / 195

Search results

Summary of Contents for Strada

Reviews: